 |
| オススメ度 |
 |
価格：6300 円（税込）
発送可能時期：在庫あり |
| 特徴 JEDEC standard 1.5V (1.425V ?1.575V) Power Supply VDDQ = 1.5V (1.425V ? 1.575V) 800MHz fCK for 1600Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 11, 10, 9, 8, 7, 6 Programmable Additive Latency: 0, CL - 2, or CL - 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential withstarting address "000" only), 4 with tCCD = 4 which does notallow seamless read or write [either on the fly using A12 orMRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQpin (RZQ : 240 ohm ± 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower than TCASE 85°C,3.9us at 85°C Asynchronous Reset PCB : Height 0.740" (18.75mm), single sided component 仕様書 CL(IDD)11 cyclesRow Cycle Time (tRCmin)48.125ns (min.) Refresh to Active/RefreshCommand Time (tRFCmin)260ns (min.)Row Active Time (tRASmin)35ns (min.)Maximum Operating Power2.160 W*UL Rating94 V - 0Operating Temperature0℃ to 85℃Storage Temperature-55℃ to +100℃ *Power will vary depending on the SDRAM used.
>>詳細を見る |
